STEPPER MOTOR CONTROLLERS درایور استپر موتور
سایر مشخصات:
نوع آی سی درایور: موتور
تعداد خروجی: 2
حداقل ولتاژ منبع تغذیه: 4.75 ولت
حداکثر ولتاژ منبع تغذیه: 10 ولت
Case style: SO
تعداد پین ها: 20
نوع پکیج: SMD
NORMAL/WAWE DRIVE
HALF/FULL STEP MODES
CLOCKWISE/ANTICLOCKWISEDIRECTION
SWITCHMODE LOAD CURRENT REGULATION
PROGRAMMABLE LOAD CURRENT
FEW EXTERNALCOMPONENTS
RESET INPUT & HOME OUTPUT
ENABLE INPUT
DESCRIPTION
The L297/A/D Stepper Motor Controller IC generates
four phase drive signals for two phase bipolar
and four phase unipolar step motors in microcomputer-
controlled applications. The motor can be
driven in half step, normal and wawe drive modes
and on-chip PWM chopper circuits permit switchmode
control of the current in the windings. A
August 1996
Symbol Parameter Value Unit
Vs Supply voltage 10 V
Vi Input signals 7 V
Ptot Total power dissipation (Tamb = 70°C) 1 W
Tstg, Tj Storage and junction temperature -40 to + 150 °C
ABSOLUTE MAXIMUM RATINGS
feature of this device is that it requires only clock,
direction and mode input signals. Since the phase
are generated internally the burden on the microprocessor,
and theprogrammer, is greatlyreduced.
Mounted in DIP20 and SO20 packages, the L297
can be used with monolithic bridge drives such as
the L298N or L293E, or with discrete transistors
and darlingtons
میکروکنترلر 8 بیتی با فلش 8K با فرکانس 16 مگاهرتز Value line, 16-MHz STM8S 8-bit MCU, 8-Kbyte Flash memory, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C
گیت درایور -کنترلر انواع اینورتر 6 آمپر Low-Side Gate Driver IC Non-Inverting 6A-Peak Low-Side MOSFET Driver
خازن MKT ظرفیت1000 نانو فاراد 100 ولت - 1 میکرو فاراد Film Capacitors MKT 1uF 100V
برد محافظ دستگاه جوش از نواسات برق ورودی تکفاز - استفاده جوشکاری با ژنراتورها ضخامت و کیفیت بسیار بالا کد AT-GEN-3PH