09120786892
atrinelectronic@gmail.com تهران پاساژ امجد طبقه1 واحد 16

چسب سیلیکون کافوتر 80 گرمی Kafuter K-5202 (جدیدترین تولید) واردات مستقیم - کیفیت بالا جدیدترین تولید

چسب سیلیکون کافوتر 80 گرمی Kafuter K-5202 (ساخت 2022)
چسب سیلیکون اورجینال کافوتر-عملکردعالی عایق الکتریکی-بدون لایه برداری و پخش شدن خوب پس از استفاده طولانی مدت - عملکرد خوب در دمای 50- تا 200+ درجه -پایداری بالا
تعداد
تخفیف
قیمت
+1
5.0 %
100,500 تومان 95,500 تومان
+20
11.0 %
94,100 تومان 89,400 تومان
+100
12.8 %
92,200 تومان 87,600 تومان

نقد و بررسی اجمالی

چسب سیلیکون اورجینال کافوتر-عملکردعالی عایق الکتریکی-بدون لایه برداری و پخش شدن خوب پس از استفاده طولانی مدت - عملکرد خوب در دمای 50- تا 200+ درجه -پایداری بالا

 

FEATURES
K-5202 is one part, room cure reinforced thermally conductive silicone elastomer with great
adhesion, insulation and dissipation.
Excellent in cold and high temperature resistance (-500C~ 2000C).
No peeling and good dissipation after long time usage.
High bonding strength, the shear strength≥18kg/cm3, and peel strength ≥ 6kg/cm3
Packing in soft metal tube.

APPLICATION
This elastomer can instead the thermally conductive silicone grease or gel in filling and
bonding the gap between CPU and radiators, thyristor control modules and radiators,
high-power electronics modules and radiators, etc.

HOW TO USE
◆Preparation
Clean the un-bonded or uncoated surfaces by removing the rust, ash, and oil, etc.
◆Application
Pierce the opening with the tip of the cap. Fix the nozzle, and coat the clean surface evenly
with the adhesives, then bond the two surfaces.
◆Curing Condition
Put the glue on the surfaces to get fully room cure. The curing progress is from outer surface
into inner surface. The elastomer can get cure in the depth of 2~4mm in 24 hours (at room
temperature, 55% moisture), if the position of the booding parts is too deep (especially the
parts not easy to contact with air) or the temperature is too low, the full cure time will be
extend.
Advise user preparing enough time to let elastomer get full cure in order to stable its properties
before the next disposing or packaging.
◆Attention
1. After finishing, pls screw its nozzle tightly and store in dry and cool place for next time using.
2. It will have some cured adhesives around the nozzle when your next time opening, just
remove the cured, then can use it again.
PACKAGING INFORMATION
80g/ tube, or Customized Package.
USABLE LIFE AND STORAGE
Store in cool and dry place, the shelf life is 12 months (≤250C)

به سبد خرید اضافه شد.
سبد خرید
Item removed. بازگرداندن